DXGI_ERROR_ACCES_DENIED
DXGI_ERROR_ACCES_DENIED
Hi there,
after updating P3DV5.1, i get suddenly the error message and than ctd.
I don`t changed any settings in the options area.
The same machine is working fine with P3DV 4.5 HF 3
any help is needed
greetings
Dieter
after updating P3DV5.1, i get suddenly the error message and than ctd.
I don`t changed any settings in the options area.
The same machine is working fine with P3DV 4.5 HF 3
any help is needed
greetings
Dieter
Re: DXGI_ERROR_ACCES_DENIED
Dieter,
Do you have:
1. Windows 10 updated to the latest level, and
2. The drivers for your graphics card updated to the latest level?
Jorgen
Do you have:
1. Windows 10 updated to the latest level, and
2. The drivers for your graphics card updated to the latest level?
Jorgen
System: i5-12600K@4.9 GHz, ASUS ROG STRIX Z690-I motherboard, 32 GB 4800 MHz DDR5 RAM, Gainward RTX 3060 w/ 12 GB DDR6 VRAM, Windows 10 Pro.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.
Re: DXGI_ERROR_ACCES_DENIED
Hi Jorgen,
i updated the drivers, win 10 also with last updates.
at least renewed the p3dV5 config - now it works fine!
Thx
Dieter
i updated the drivers, win 10 also with last updates.
at least renewed the p3dV5 config - now it works fine!
Thx
Dieter
-
- Posts: 30
- Joined: Mon Apr 20, 2020 7:42 pm
Re: DXGI_ERROR_ACCES_DENIED
Good Morning Dieter,
i got the same problem unfourtunetaly, can you please explain the steps that you made to get it work a little bit more accurate ? Thanks
greetings
Johannes B.
i got the same problem unfourtunetaly, can you please explain the steps that you made to get it work a little bit more accurate ? Thanks
greetings
Johannes B.
Re: DXGI_ERROR_ACCES_DENIED
I would believe that Dieter means that after updating drivers and Windows 10 to the latest level, he deleted Prepar3d.cfg and let P3D generate a new file - Dieter, please correct if I am mistaken.
Jorgen
Jorgen
System: i5-12600K@4.9 GHz, ASUS ROG STRIX Z690-I motherboard, 32 GB 4800 MHz DDR5 RAM, Gainward RTX 3060 w/ 12 GB DDR6 VRAM, Windows 10 Pro.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.
Re: DXGI_ERROR_ACCES_DENIED
Hi Jorgen,
that`s correct what youre writing.
but unfortunately i get now the same problem, by changing the orbx settings.
I tried to install new libraries and now i have DXGI_ERROR_ACCES_DENIED
Hopefully find a solution
greetings
Dieter
that`s correct what youre writing.
but unfortunately i get now the same problem, by changing the orbx settings.
I tried to install new libraries and now i have DXGI_ERROR_ACCES_DENIED
Hopefully find a solution
greetings
Dieter
Re: DXGI_ERROR_ACCES_DENIED
@ Dieter K ,
I have Orbx and installed Orbx libraries ok.
What procedure are you using to do Orbx Libraries?
Best Regards,
Vaughan Martell PP-ASEL (KDTW)
Vaughan Martell PP-ASEL (KDTW)
Re: DXGI_ERROR_ACCES_DENIED
Hi ,
my ORBX libraries and folders are stored on a seperate SSD.
I have a lot.the insertion point are set correctly
greetings
dieter
my ORBX libraries and folders are stored on a seperate SSD.
I have a lot.the insertion point are set correctly
greetings
dieter
Re: DXGI_ERROR_ACCES_DENIED
Hi there,
I uninstalled the last two windows 10 updates and after this - No DXGI_EROR messages
hopefully the solution
greetings
dieter
I uninstalled the last two windows 10 updates and after this - No DXGI_EROR messages
hopefully the solution
greetings
dieter
Re: DXGI_ERROR_ACCES_DENIED
Hi all after reading this post I have been doing some experiments.
I have all the latest updates both in windows and NVIDIA.
I deleted the generated files in P3D and I have no errors.
We will see how it lasts .
It’s a pain in the ass.
I have all the latest updates both in windows and NVIDIA.
I deleted the generated files in P3D and I have no errors.
We will see how it lasts .
It’s a pain in the ass.
Re: DXGI_ERROR_ACCES_DENIED
Please check the under Options/World, that the checkbox "Enable Bathymetry" is unchecked.
Also, did you run the P3D installer as Administrator?
Jorgen
Also, did you run the P3D installer as Administrator?
Jorgen
System: i5-12600K@4.9 GHz, ASUS ROG STRIX Z690-I motherboard, 32 GB 4800 MHz DDR5 RAM, Gainward RTX 3060 w/ 12 GB DDR6 VRAM, Windows 10 Pro.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.
Re: DXGI_ERROR_ACCES_DENIED
@ Dieter K ,
Glad to hear your problem is resolved.
Best Regards,
Vaughan Martell PP-ASEL (KDTW)
Vaughan Martell PP-ASEL (KDTW)
Re: DXGI_ERROR_ACCES_DENIED
Rolling back windows updates is hardly a resolution. Maybe a temporary fix perhaps.
Re: DXGI_ERROR_ACCES_DENIED
There is another point which affects the DXGI_EROR.
i found out that the true glass dll caused the problems!!
i found out that the true glass dll caused the problems!!
Re: DXGI_ERROR_ACCES_DENIED
Aha - what did you do about it, exactly?
Jorgen
Jorgen
System: i5-12600K@4.9 GHz, ASUS ROG STRIX Z690-I motherboard, 32 GB 4800 MHz DDR5 RAM, Gainward RTX 3060 w/ 12 GB DDR6 VRAM, Windows 10 Pro.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.