HI Guys
MY P3D keeps going into Visualisation Mode and then try to load into a flight it crashes to desktop Everytime
I have removed every addon and done two reinstall of P3D
If anyone could help it would be appreciated
Sam
Visualisation Mode
Re: Visualisation Mode
Sam,
I need you to explain what you mean by "visualisation mode", and also your system specs....
Jorgen
I need you to explain what you mean by "visualisation mode", and also your system specs....
Jorgen
System: i5-12600K@4.9 GHz, ASUS ROG STRIX Z690-I motherboard, 32 GB 4800 MHz DDR5 RAM, Gainward RTX 3060 w/ 12 GB DDR6 VRAM, Windows 10 Pro.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.
Re: Visualisation Mode
Hi Jorgan, I think he is referring to the message one sees when P3D is unable to load the default aircraft.
Sam, let the simulator load in "visualization mode," and then set a default scenario with the aircraft of your choice and the location you want (I recommend a location within your time zone).
Sam, let the simulator load in "visualization mode," and then set a default scenario with the aircraft of your choice and the location you want (I recommend a location within your time zone).
Dan Downs
KCRP
KCRP
-
- Posts: 7
- Joined: Tue Apr 21, 2020 9:03 am
Re: Visualisation Mode
Hi Guys
i have just tried this and the issue is still occurring it normally gets to about 74% Then crashes.
I have also Noticed my SSD space Has also been freed slightly.
many Thanks
Sam
i have just tried this and the issue is still occurring it normally gets to about 74% Then crashes.
I have also Noticed my SSD space Has also been freed slightly.
many Thanks
Sam
Re: Visualisation Mode
Hi Sam,
What are your system specs?
Jorgen
What are your system specs?
Jorgen
System: i5-12600K@4.9 GHz, ASUS ROG STRIX Z690-I motherboard, 32 GB 4800 MHz DDR5 RAM, Gainward RTX 3060 w/ 12 GB DDR6 VRAM, Windows 10 Pro.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.
Re: Visualisation Mode
Sam,
One possible cause is a bad VehicleFavorites.xml
Go to your
Users
You (e.g. your name)
AppData
Roaming
Lockheed Martin
Prepar3D v4 or v5 ?
And delete the VehicleFavorites.xml file.
Reboot PC.
Start P3D v4 (or v5) ?
For the Crashes to desktop:
To try to isolate what is causing the CTD
Look in the Windows Event Viewer and get the
Faulting Module Name
example:
One possible cause is a bad VehicleFavorites.xml
Go to your
Users
You (e.g. your name)
AppData
Roaming
Lockheed Martin
Prepar3D v4 or v5 ?
And delete the VehicleFavorites.xml file.
Reboot PC.
Start P3D v4 (or v5) ?
For the Crashes to desktop:
To try to isolate what is causing the CTD
Look in the Windows Event Viewer and get the
Faulting Module Name
example:
Best Regards,
Vaughan Martell PP-ASEL (KDTW)
Vaughan Martell PP-ASEL (KDTW)
-
- Posts: 7
- Joined: Tue Apr 21, 2020 9:03 am
Re: Visualisation Mode
HI Guys
Have tried the Above Idea and still the same issue So now going to Install the whole PRepar3d V5 Folder again
My specs are a GTX 1070 8gb I78700K OC4.8 16GB Ram
Have tried the Above Idea and still the same issue So now going to Install the whole PRepar3d V5 Folder again
My specs are a GTX 1070 8gb I78700K OC4.8 16GB Ram
-
- Posts: 7
- Joined: Tue Apr 21, 2020 9:03 am
Re: Visualisation Mode
HI Guys issue is fixed thanks for the help