Wind problem

Other problems or issues not covered by other troubleshooting topics.
axel ceder
Posts: 14
Joined: Sun Mar 15, 2020 5:15 pm

Wind problem

Postby axel ceder » Sun Mar 15, 2020 5:28 pm

Hello! when I fly and will land at an airport eg Arlanda the flight tower says I should land on runway 01L. Then when I test another weather theme, there are exactly the same. I also have Orbx weather theme installed. I also try to do user-defined weather and try to change the winds but it does not work. This is how it is at all airports.

Previously I used Fsx-se and then I could use different runways depending on which weather theme I chose, and it is the same weather theme as in fsx-se.

Is there anyone who could help me with this?

Sincerely Axel

Martyson
Posts: 8318
Joined: Sun Mar 25, 2012 11:08 am

Re: Wind problem

Postby Martyson » Sun Mar 15, 2020 5:47 pm

Axel,

Are you using Orbx ESSA with the Orbx weather?

Are you flying with the default LM ATC?

Not all airports have all runways available for Takeoff and Landing.
Best Regards,
Vaughan Martell (KDTW)

axel ceder
Posts: 14
Joined: Sun Mar 15, 2020 5:15 pm

Re: Wind problem

Postby axel ceder » Sun Mar 15, 2020 6:28 pm

Yes, I'm using Orbx essa
No thats true, but all airport have the same runway direction when take off and landning.

Yes I'm using LM ATC.

For example, the atc just give me clears to land or start on runway 01L / R or 08 at Arlanda. Not 19 no matter what direction the wind has.

This is the same for every airport. The airport that have runways from south-north, the south end is always the landning/take off part.
Airport that have runways from East-west, the west part of the runway is always the landning/take off part

Sincerely Axel :)

Martyson
Posts: 8318
Joined: Sun Mar 25, 2012 11:08 am

Re: Wind problem

Postby Martyson » Sun Mar 15, 2020 7:05 pm

Axel,

I checked Orbx ESSA and as far as I can tell they have it set up that way as you discovered.

As a quick test contact Orbx Forum Support and ask the question.
Best Regards,
Vaughan Martell (KDTW)

axel ceder
Posts: 14
Joined: Sun Mar 15, 2020 5:15 pm

Re: Wind problem

Postby axel ceder » Sun Mar 15, 2020 8:05 pm

ok, but it's not just in essa, it's in every airport in the game.

Sincerely Axel

Martyson
Posts: 8318
Joined: Sun Mar 25, 2012 11:08 am

Re: Wind problem

Postby Martyson » Sun Mar 15, 2020 9:51 pm

Axel,

Try default airport KGRR.
Best Regards,
Vaughan Martell (KDTW)

axel ceder
Posts: 14
Joined: Sun Mar 15, 2020 5:15 pm

Re: Wind problem

Postby axel ceder » Mon Mar 16, 2020 2:43 pm

Hi! I have now try that airport and looks to work, I've also try to fly in Heatrow, copenhagen and oslo and works fine whit the user-defined weather. So do you know how i can solve the problem whit Essa?

Sincerely Axel

Martyson
Posts: 8318
Joined: Sun Mar 25, 2012 11:08 am

Re: Wind problem

Postby Martyson » Mon Mar 16, 2020 4:27 pm

Hi! I have now try that airport and looks to work, I've also try to fly in Heatrow, copenhagen and oslo and works fine whit the user-defined weather. So do you know how i can solve the problem whit Essa?

Sincerely Axel
Yes, you have now confirmed that not "all" default airports have limited landing runways.


"how i can solve the problem whit Essa?"
As I previously mentioned, contact Orbx (forum) Support .
Best Regards,
Vaughan Martell (KDTW)

User avatar
downscc
Posts: 1540
Joined: Mon Dec 01, 2014 5:46 pm
Location: KCRP

Re: Wind problem

Postby downscc » Mon Mar 16, 2020 5:04 pm

This is probably by design. The Jeppesen ESSA General Briefing (10-1P1) gives as a restriction to large aircraft: RWY01L/19R will be used for take-off and landing.
Dan Downs
KCRP

Martyson
Posts: 8318
Joined: Sun Mar 25, 2012 11:08 am

Re: Wind problem

Postby Martyson » Mon Mar 16, 2020 5:12 pm

This is probably by design. The Jeppesen ESSA General Briefing (10-1P1) gives as a restriction to large aircraft: RWY01L/19R will be used for take-off and landing.
Dan,

The problem, he cannot use ESSA rwy 19.
Best Regards,
Vaughan Martell (KDTW)

Martyson
Posts: 8318
Joined: Sun Mar 25, 2012 11:08 am

Re: Wind problem

Postby Martyson » Tue Mar 17, 2020 6:45 pm

Axel,

Did the answer on the Orbx Forum work for you?
Best Regards,
Vaughan Martell (KDTW)

axel ceder
Posts: 14
Joined: Sun Mar 15, 2020 5:15 pm

Re: Wind problem

Postby axel ceder » Wed Mar 18, 2020 3:20 pm

Yes it did, Thanks!!

Martyson
Posts: 8318
Joined: Sun Mar 25, 2012 11:08 am

Re: Wind problem

Postby Martyson » Wed Mar 18, 2020 3:26 pm

Yes it did, Thanks!!
What was the solution so other pilots can have the same takeoffs?

Can you now takeoff from runway 26?

Was the solution provided by Orbx ?
Best Regards,
Vaughan Martell (KDTW)

Martyson
Posts: 8318
Joined: Sun Mar 25, 2012 11:08 am

Re: Wind problem

Postby Martyson » Sat Mar 21, 2020 9:41 am

As far as I can tell from the German section of the Orbx P3D forum;

One user has modified the Orbx ESSA Afcad using ADE and made available his edited copy.
The edited copy updates runways Takeoff/Landing
I did not see an answer or solution from Orbx.
Best Regards,
Vaughan Martell (KDTW)


Return to “Other Support Questions”

Who is online

Users browsing this forum: No registered users and 30 guests